Sliding/overhang gates (called as well movable) consist of a linen moving across the fence and so on. Sliding gates are designed for villas, parking, various industrial territories and so on, where you need gates as wide as possible.

No limitations from above or any constructions below. The only "disadvantage" of the gates is that it takes 30% of the width of the gates of additional linen towards the side it’s opening on (plus the width of partition itself). This type of gates with electric drive is excellent for the Russian climate.

Sliding gates are made to order of any color and size

• Sliding gates are made from Russian materials with a follow-up powder spraying with thermal processing at 200С;
• You can choose any color from the catalogue for trimming the gate linen (see RAL colors);
• The profile used during the production of protective roll shutters is of excessive durability;
• Sliding gates may be equipped with an electric drive with security device against the linen encountering an obstacle (photo-elements – ray barrier), remote control, unblocking in case of a blackout;
• For automatization of traversing gates, RolMaster has been using for several years now the production of world famous CAME.

Automatic systems by САМЕ are constantly advancing taking all the best from the technical progress. Automatic systems by CAME are exceptional for operation in the Russian climatic conditions. The range is the widest among similar brands and can address the needs of all clients. Electric drives for traversing, movable gates. For more information on drives ВХ for traversing, movable gates.

Sliding gates from steel sandwich panels

Sliding gates from steel sandwich panels are more modern solutions in terms of engineering. First and foremost, the shield of these gates is lighter than a similar bar trimming from profile pipes or a shield from steel roulette profiles SТ-100, SТ-75, SТ-50.


New samples of traversing and movable gates from steel sandwich panels

Sliding gates from steel sandwich panels have a very neat and complete design at the expense of parameters of technical features of panels. Steel sandwich panels are used in vertical position only, which gives additional firmness to the construction.

In the construction of traversing, movable gates, steel sandwich panels, should the client wish to order, may as well be used in the horizontal position. Here are some samples. "Movable, sliding gates from sandwich panels with a built-in wicket"

Overall features of the panel:

Soundproof coefficient: ДБ-24(DIN 52210), Thermal conductivity: Вт/моС-0,38, Class of fire-resistance: В2 (DIN 4102), Class of wind load: 2(EN 12424). By the way, from exactly these panels, the linen for section gates is made. All the gate construction is made from special zinc-coated profiles, which, like the panels, have a polymeric covering using the technology of powder painting followed by thermal processing.

Standard colors of sliding gates from steel sandwich panel
		8014 standard brown		6005 dark green
		3005 cherry		5005 dark blue
		9003 white with a slight dark shade		9006 aluminum metallic

Gates of other colors are charged additional 18%.

Sliding gates are a very simple construction and reliable in use.

The lower part of sliding gates along the whole width is rolled to monorail. The support rolls are inside the monorail. Such a construction enables to easily open the gates manually and to the drive to operate reliably in winter time.
Two blocks (strengthening on reinforced concrete base) stand at accurately calculated distance from each other (see photo) and ensure the necessary balanced equality of the overall system. Moreover, in the upper part of the linen there are special rolls which rule out a side swing of the gates which allows to produce sliding gates with big areas. The firm construction of the linen is calculated taken into account strong wind loads ruling out deformation of the linen throughout the whole period of use.

Excellent gates may be produced for 16m wide apertures.

See also:

• Breakdown of the construction of sliding gates in a new window;
• Unique solutions for sliding, movable gates

For those of you who decided to automate your house completely, we also offer roll shutters, roll-up gates for garages. All products may be accomplished in one color and controlled by one remote control.

Attention: The colors on your screens may differ from the real color of articles.
We advice you pick the final color from the catalogue right on the item.

To reiterate, when calculating production articles, given the non-standard colors and metal, antique, the extra charge coefficient is К-1,18. For example, if your article is 2,5 square meters and costs, manually assembled, 225 conventional units , then given the non-standard package your order will increase at 18%.

• RAL color range

The size and color of gates are chosen by the client. Give us your version, tell us about the gates you wish to get and our specialists will consider your suggestions, if required, will explain how to make your idea even more perfect. Durable, reliable, super safe sliding gates will serve for a very long time because, among other things, the materials used in their production resist any calamity of the nature: heavy showers, snowfalls, hurricanes, drastic changes in temperature are incapable of causing them any harm.